Power Switch And Jog Dial Guide - HUROM M100 Serie Manual De Instrucciones

5. Power Switch and Jog Dial Guide

< Juicer Standby Mode (container present) >
Operate
- It works when the [START/STOP] button is briefly
pressed in the Standby Mode.
- It is used when activating the product for juicing.
- It is automatically terminated and switched to
the Standby Mode after 5 minutes elapse from
the start of the operation. If the chamber cover
is opened and then closed during operation for
additional insertion of ingredients, the timer is
reset.
* If the hopper cover is opened during operation,
the product stops. If the hopper cover is closed
again within 60 seconds, the operation continues.
But, if 60 seconds elapse, the operation
automatically stops and it switches to the Standby
(stop) state.
Stop
- This is used to stop the product's operation.
- The product stops when the [START/STOP]
button is briefly pressed in the operation state.
* If the chamber set is not installed, all lamps are
turned off.
* When 1 minute has elapsed from the Standby
(stop) state, the product enters the power saving
mode (light turned off). If the [START/STOP] button
is pressed or the chamber set is assembled, the
power saving mode is deactivated and it switches
to the Standby (stop) state.
Reverse Rotation
- This is used when the operation pauses or
a reverse rotation is needed due to excessive
insertion of ingredients during extraction.
* It works only when the [START/STOP] button is
pressed for over 1 second, and it stops when the
switch is released.
* If the screw stops during extraction, the product
automatically rotates in reverse but, if the power
is unstable, the reverse rotation may not work. In
such a case, press the [START/STOP] button for
over 1 second to activate a reverse rotation and
then press the [START/STOP] button again briefly
to activate.
< Blender Standby Mode (container present) >
Manual Mode 01
Turn the jog dial clockwise to operate the device at
a desired speed.
Once cooking finishes, return the jog dial to the [
Power Display Lamp ] position.
* The motor stops automatically after max. 1
minute of operation.
Manual Mode 02 (Pulse Mode)
While the [START/STOP] button is pressed, the
motor operates at the maximum speed. Once
the button is released, the operation stops and it
switches to the Standby (stop) state.
* The motor stops automatically after max. 1
minute of operation.
When you turn the jog dial in Auto Mode
the LED of the desired program mode is lit and,
once the [START/STOP] button is pressed, the
selected [Auto Mode] begins.
Once cooking finishes, the operation stops
automatically.
To stop the operation, return the jog dial to the
Power Display Lamp position or press the [START/
STOP] button, which cancels the operation and
switches to the Standby Mode.
09