Detection Range - Waeco MagicWatch MWE 910 Instrucciones De Montaje Y De Uso

MagicWatch MWE910, 900, 900F
The complete circuit diagram MWE900F can be found in fig. c.
No. Designation
1 Control electronics
2 Black/blue cable: connection to the reversing light
3 Brown cable: connection to earth
4 Yellow cable from the loudspeaker: connection to slot 15 in the plug of the control
electronics
5 Blue cable from the loudspeaker: connection to slot 3 in the plug of the control
electronics
6 Yellow/black cable: connection to the speed signal from the speedometer (optional)
7 Red/grey cable: connection to the radio's mute connection (optional)
8 Front sensors
7

Detection range

See fig. e
The detection range of the parking aid is divided into four zones:
 Zone 1
This zone is the first limit range. Small objects or those with poor reflective
characteristics may not be detected.
 Zone 2
Nearly all objects are displayed in this zone.
 Zone 3
Nearly all objects in this zone are displayed, however objects may only
appear in the sensors' blind spot, or not be detected at all due to their
consistency or small size.
 Stop zone (4)
If there are objects in this zone, the parking aid emits a continuous tone
warning you to stop.
Nearly all objects in this zone are displayed, however objects may only
appear in the sensors' blind spot or not be detected at all due to their
consistency or small size.
The distance at which the parking aid signals to stop is adjustable in
stages.
Displaying fixed objects, such as a trailer hitch, can be suppressed.
EN
Detection range
27