Maintenance; Instrument Description; Front Panel - KPS -MT420 Manual De Instrucciones

Complies with European (EU) safety standards
Alternating current
Direct current
Conforms to UL STD. 61010-1, 61010-2-032,
61010-2-033; Certified to CSA STD C22.2 NO.
61010-1, 61010-2-032,61010-2-033
CAT III (MEASUREMENT CATEGORY III): It is applicable to
test and measuring circuits connected to the distribution part
of the building's low-voltage MAINS installation.

1.1.3 Maintenance

• Maintenance/calibration should only be performed by
professionals.
• For continued protection against fire, replace fuse only
with the specified voltage and current ratings listed in
the manual: F1 400mA/600V and F2: 10A/600V
• Before opening the case, always disconnect test leads
from all energized circuits.
• Never use the meter unless the back cover is in place
and fastened securely.
• If any abnormality is observed, stop using the meter
and send it in for repair.
• If the meter is not going to be used for an extended
period of time, remove the batteries and avoid storing
in a hot/humid environment.

2.Instrument Description

2.1 Front Panel

1. Display
2 . Hold Button
3 . Rotary Switch
4 . Input Jacks
03
1
2
3
4
04