4.1 Function keys
Press on of the following keys to perform the desired function.
Sleep button
Turn on/off sleep mode
Decreases the display
brightness
Increases the display
brightness
Switches display output
between your display, external
monitor (if connected) and both
Mute or unmute your system
Decreases the volume level
Note:
If your software uses some of the function keys to perform dedicated functions,
you can perform the function by pressing "Fn" plus the desired function key.
4.2 Folding the keyboard
Note:
Increases the volume level
When plugging in HDMI/Ethernet, do not open the screen over 100 degrees.
4.3 Stylus pen battery replacement
Disable and enable the
touchpad
Adjust the brightness of the
backlit keyboard
Captures an image of your
entire screen
Suspend the execution of
the program for seconds
5. TURN ON/OFF YOUR DEVICE
If this is the first time you turn on your device, connect the AC adapter and fully
charge the battery.
To turn on your equipment, press the power button (normally 1 to 2 seconds)
until the display is turned on and the Home screen appears.
1. Unscrew the end part of the stylus.
2. Replace the AAAA battery with the positive
(+) end of the battery pointing toward the
writing tip.
3. Screw the end back on.
7