Publicidad
Idiomas disponibles
Idiomas disponibles
[ASSIGN] setting ([ASSIGN] condition display)
1
Select the function to be assigned to the <SELECT> dial button with [MAIN MENU] → [FUNCTION] → [ASSIGN].
2
Press the <SELECT> dial button.
3
Press the <MENU> button to close the menu.
4
Turn the <SELECT> dial button to change the setting.
The function that is being operated and its adjustment value are displayed.
f This display disappears after approximately two seconds of inaction.
Key lock setting
Operation of the <F1> to <F3> buttons, <SELECT> dial button, and <MENU> button can be disabled.
The <POWER> button, <BRIGHT> knob, <CONTRAST> knob, and <PEAKING> knob cannot be disabled.
1
Press the <SELECT> dial button while operating to display the mode check display, and then press and hold the <MENU> button
for three seconds or longer.
A key mark is constantly displayed at the top left of the screen while in key lock.
f The setting is cleared when the power is turned off.
f To clear the key lock, press and hold the <MENU> button for three seconds or longer.
Menu structure
[MAIN MENU]
[MARKER]
[FUNCTION]
[VIDEO CONFIG]
[SYSTEM CONFIG]
[HOURS METER]
[TALLY BRIGHT]
[FOCUS ASSIST]
[ FOCUS-IN-R ]
15
<MENU> button
(Key mark)
<MENU> button
<SELECT> dial button
Performs the setting regarding the marker.
Performs the setting regarding the operation of the <F1> to <F3> buttons.
Performs the setting regarding the screen.
Performs the setting regarding the system.
Displays the elapsed time and illuminated time of the backlight.
Sets the brightness of the up tally lamp and front tally lamp.
Sets the function of the focus assist.
<SELECT> dial button
<F1> to <F3> buttons
Menu operations
27
Publicidad
