Publicidad
INSTALLATION:
HOOP can be used as a table device or fixed to the wall.
Remove the cover as indicated in Fig. 2.
The fastening support is predisposed to open using the pressure of a screwdriver
for passage of the cables (Fig.2 Ref. C) and to fasten to the wall (Fig.2 Ref. F).
If fastening to a wall, use the plugs (not supplied) as indicated in Figure. 3.
HOOP CONNECTIONS:
A
B
C
With reference to Figure 4:
A - LAN Ethernet (RJ45) input
B - Power cable input
C - 2 clean contact inputs
D - Output 1 clean contact 250Vac 5A
E - Output 2 clean contact 250Vac 5A
- Use the power supply unit 24Vdc supplied to power the device
- For connection to the LAN network, use the specific input** (Fig.4 Ref. A).
CABLED DEVICE
If using devices cabled directly to HOOP, refer to Figure 5. That indicated is an
example of installation on the Benincà's command units. You can use the inputs/
outputs available for connection of automations by other manufacturer's or
other devices.
IMPORTANT!
Check the GOI output of the command unit is actually configured as GOI (Gate
Open Indicator).
I.HOOP MODULE INSTALLATION
To install the 868 MHz i.HOOP radio module (optional), proceed as follows:
- Open the door with the help of a screwdriver as indicated in Figure 11.
- Remove the upper cover of the HOOP gateway, with the help of a screwdriver
(Fig. 12
- Insert the i.HOOP radio module in hole H by applying slight pressure to the side
surface of the gateway.
- Trigger the two connectors with light pressure (Fig. 13)
D
E
- Screw in the antenna provided with the i.HOOP module as indicated in Figure
14 and close the cover of the gateway.
DEVICE START-UP:
Switch-on takes place as soon as HOOP is powered using the specific input
(Fig. 4 Ref. B).
USER AND INSTALLATION ACCOUNT REGISTRATION
To be able to use the system, you need to download the Benincà BeMOVE ap-
plication on your smartphone or tablet (for end users) or the app BeUP (for in-
stallation technicians). The apps are available on PlayStore (Android) and Apple
Store (iOS). Having downloaded the app, you need to register an account on the
Benincà cloud server.
EN
21
Publicidad
