Initial Startup; Water Supply - Kärcher K 5 Premium Smart Control Manual De Instrucciones

7. Press the "+" button and the "-" but-
ton on the high-pressure gun simul-
taneously for at least 3 seconds.
If pairing is successful, the pressure
stages as well as the radio and Blue-
®
tooth symbol are shown on the dis-
play.
®
The Bluetooth
the mobile unit and the high-pres-
sure cleaner is established automat-
ically.
Note
If required, you can also establish the
®
Bluetooth connection subsequently
by pressing the "-" key for 10 s.
8. If the pairing attempt failed:
a Pull the mains plug of the high-
pressure cleaner out of the socket.
b Wait 20 seconds.
c Pair the high-pressure gun again.
12
connection between

Initial startup

1. Place the device on a level surface.
2. Completely unwind the high-pres-
sure hose from the hose reel.
3. Pull the high-pressure hose com-
pletely forward through the hose
guide.
4. Insert the high-pressure hose into
the high-pressure gun until it audibly
clicks into place.
Note
Make sure the nipple is oriented cor-
rectly.
5. Check the secure connection by
pulling on the high-pressure hose.
6. Insert the mains plug into an outlet.

Water supply

For connected loads, see type plate or
chapter Technical data.
Observe the instructions of the water
supply company.
ATTENTION
Damage due to contaminated water
Contaminated water can damage the
pump and accessories.
For protection, KÄRCHER recom-
mends the use of the KÄRCHER water
filter (special accessory, order number
4.730-059).
English