Descargar Imprimir esta página

Interrupting Operation; Finishing Operation - Kärcher K 5 Premium Smart Control Manual De Instrucciones

Ocultar thumbs Ver también para K 5 Premium Smart Control:

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Turn the 3-in-1 Multi Jet spray lance
to the "MIX" detergent nozzle until
the LCD "MIX" lights up on the pres-
sure indicator of the high-pressure
gun.
During operation, the detergent
solution is mixed into the water
stream.
4. Use the "+/-" buttons on the high-
pressure gun to set the desired de-
tergent concentration.
5. Optionally use the foam nozzle.
a Connect the foam nozzle to the
detergent tank.
b Insert the foam nozzle into the
high-pressure gun and secure it in
place by turning it 90°.
Recommended cleaning method
1. Spray the detergent sparingly on the
dry surface and let it work for a while
(do not let it dry).
2. Rinse off the loosened dirt with the
high-pressure jet.
After operation with detergent
1. Pull the Plug 'n' Clean detergent bot-
tle out of the holder and close it with
the lid.
2. For storage, place the detergent
bottle in the holder with the lid facing
upwards.
3. For rinsing, operate the appliance
for about 30 seconds in detergent
stage 1.
16

Interrupting operation

1. Release the lever of the high-pres-
sure gun.
When the lever is released, the de-
vice switches off. The high-pressure
in the system is maintained.
2. Lock the lever of the high-pressure
gun.
3. Set the high-pressure gun with the
spray lance in the parking position.
4. For work breaks longer than 5 min-
utes, switch off the device "0/OFF".

Finishing operation

CAUTION
Pressure in the system
Injuries due to uncontrolled water es-
caping under high pressure
Only disconnect the high-pressure hose
from the high-pressure gun or the device
if there is no pressure in the system.
1. Release the lever of the high-pres-
sure gun.
2. Close the water tap.
3. Press the lever of the high-pressure
gun for 30 seconds.
The pressure still remaining in the
system is released.
4. Release the lever of the high-pres-
sure gun.
5. Lock the lever of the high-pressure gun.
6. Disconnect the device from the wa-
ter supply.
7. Switch off the device "0/OFF".
8. Pull the mains plug out of the outlet.
English

Publicidad

loading