Adjusting Pump Pressure; Circuit Diagram / Diagrama De Cableado - Mi-T-M MH-0075-RM10 Manual Del Operador

7. Insert Fuel Filter in the Fuel Tank and using adjustable wrench turn the Filter 90 degrees clockwise.
8. Attach Fuel Line to Fuel Filter neck.
9. Reinstall side cover with screws provided.

ADJUSTING PUMP PRESSURE

After hours of use it may be necessary to adjust the Pump Pressure. If the heater is not producing a
strong flame: Increase the pressure by turning the adjustment screw clockwise. If the heater is producing
a flame that extends beyond the end of the heater: Reduce the pressure by turning the adjustment screw
counterclockwise.
Adjusting Pump Pressure
Model #
MH-0075-RM10
MH-0135-RM10
MH-0190-RM10
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR WHILE CONNECTED TO A FUEL
SOURCE.
Black
Brown
White
Red
Yellow
Green
Photo Cell /
Fotocélula
Kerosene Portable Heaters Manual
MAINTENANCE
Pump Pressure
5.5 PSI
6.0 PSI
7.5 PSI

CIRCUIT DIAGRAM / DIAGRAMA DE CABLEADO

Spark Plug /
Negro
Bujía
Café/marrón
Blanco
Rojo
Black
Amarillo
Ignitor/
Verde
Arrancador
Brown
CN2
Burning Lamp/
Lámpara
Candente
CN5
Black Black
Capacitor /
Condensador
Red Yellow
Black
Motor Pump/
Bomba de
Motor
Brown White Black
CN4 CN1
Fuse / Fusible
250V/10A
Thermostat/Termostato
Switch /
White White
Interruptor
Black
Yellow
/ Green
Black White
Power Plug
Enchufe
17