Replacing The Spark Plug; Seasonal Maintenance Schedule; Fuel Filter; Replacing The Fuel Filter - Mi-T-M MH-0075-RM10 Manual Del Operador

REPLACING THE SPARK PLUG

1. Remove Upper Shell.
2. Remove igniter wire from Spark Plug.
3. Remove Spark Plug from Nozzle Rod using medium Phillip screwdriver.
4. Clean and re-gap the Spark Plug electrodes to 0.140 inches (3.5 mm) gap.
5. Reinstall Spark Plug into Nozzle Rod.
6. Attach igniter wires to Spark Plug.
7. Secure Upper Shell.
Burner Head
Ignitor
Wire
Air Hose
Fuel Hose

SEASONAL MAINTENANCE SCHEDULE

FUEL FILTER

The Fuel Filter should be cleaned or replaced at the start of the season and as needed throughout the sea-
son to ensure optimal performance by the heater. Clean the Fuel Filter by rinsing the screen with clean 1-K
Kerosene.

REPLACING THE FUEL FILTER

1. Remove the Right Side Panel screws using a medium Phillips screwdriver.
2. Remove Side Cover.
3. Disconnect the Fuel Line from the Fuel Filter neck.
4. Turn Fuel Filter counterclockwise 90 degrees using an adjustable wrench.
5. Pull upwards and remove.
6. Wash Fuel Filter with clean 1-K Kerosene.
Fuel Filter
Screw
Side Cover
Power Switch
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR WHILE CONNECTED TO A FUEL
SOURCE.
16
MAINTENANCE
Spark Plug
Air Hose
Fitting
Fuel Line
Power Switch Wire
Nozzle
Rod
Fuel Hose
Fitting
Kerosene Portable Heaters Manual