Lcd Display Indication And Settings - SCHOTT KL 1500 H Serie Manual Del Usuario

24
2.5 LCD display indication
EN
and settings
Display brightness
Lamp operating time display
The brightness set on the light intensity control can be displayed either in
percent or Kelvin (see "Light intensity setting").
Briefly press the light intensity control to switch between the settings.
The total operating time of the halogen lamp used can be shown in the LCD
display in full hours.
Press the light intensity control for longer than five seconds to enter menu con-
trol. As soon as the light source is in menu control, the lamp switches off.
Turn the light intensity control to the right and left to move the display arrow in
the corresponding menu fields. The respective active menu field is highlighted.
Briefly press the light intensity control to enter the selected submenu.
Select the "On/Off" submenu to display the total operating time. Turn the light
intensity control to select "On" and confirm by briefly pressing it (check mark
appears in the menu field). Select "Menu" and then "Exit". The lamp switches on
again. Select the "On/Off" submenu again to switch off the total operating time.
By turning the light intensity control, now select "Off" and confirm it by briefly
pressing it (check mark appears in the menu field).