Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

The life of the lamp socket is approximately 20,000 hours of operation or
alternatively approximately 20 lamp replacements.
To replace the lamp socket, first carefully pull off the lamp as described
above. Use a screwdriver to loosen the upper fastening screw of the clamp
and remove the complete component. Then insert the two cable ends of the
new base (see "3.1 Spare parts") into the corresponding openings of the
terminal and retighten the screw. Make sure that it is firmly seated.
Put the lamp back on and press it into the holder as described above. Then
push the lamp compartment back in until it locks into place (you will hear it
click into place). Now you can plug in the power plug and switch on the light
source.
Halogen lamp 15 V / 150 W
Philips 6423
Osram 64634 HLX
Lamp base
SCHOTT only guarantees proper function, safety and optimum light output
when the specified types of spare parts are used.
Order No. 153000
Order No. 150710
Socket replacement

3.1 Spare parts

29
EN

Publicidad

Solución de problemas

loading

Este manual también es adecuado para:

Kl 1500 hal