Supplementary Optics - SCHOTT KL 1500 H Serie Manual Del Usuario

25
Select "Menu" and then "Exit". You can reset the total operating time after
EN
a lamp change. To do this, select the "Reset" item in the menu control and
confirm it by pressing briefly (a check mark appears in the menu field).
Select "Menu" and then "Exit".

Supplementary optics

Swiveling the additional optics ensures a uniform, high-intensity illumination
is achieved even when using light guides with a bundle diameter smaller than
9 mm. If the illumination includes a focusing lens, a uniform illumination can
be achieved by swinging out the additional optics. Turn the swivel lever to the
left or right to the corresponding symbols to swivel the additional optics in or
out. Make sure that the additional optics are always swiveled in or out to the
end stop.