Publicidad
Idiomas disponibles
Idiomas disponibles
5.4 Cleaning the spring guide
Use the following procedure to clean the spring
guide:
1.
Pull the black plastic spring guide in cutting
direction.
2.
Remove any wood chips from groove and guide
fence. For this purpose, use a suction device of
the HEPA class.
The spring guide is cleaned.
✓
5.5 Storage
Clean the machine thoroughly if it is not used for a longer period of time. Spray bare metal parts with a rust
inhibitor.
6
Optional accessories
- Chip breaker guard plastic section for guiding device S
- Chip breaker guard kit F-SS 3.4 m for guiding device M/ML/L
- Adhesive section F-HP 6.8 m for guiding device M/ML/L
7
Exploded view and spare parts list
The corresponding information on the spare parts can be found on our homepage: www.mafell.com
16
Fig. 17: Cleaning the spring guide
Guiding device L/M/ML/S
Order no. 204371
Order no. 204375
Order no. 204376
06/2021
Publicidad
