Precautions For Installation - Rointe ELBA OVAL WI-FI TELWN40B077 Manual De Instalacion Y Uso

An installation kit is included in the packaging. Follow the instructions below:
1. Choose the right part of the wall.
2. Place the mounting stencil on the wall, marking the places for the holes.
3. Remove the stencil and make the holes in the wall.
4. Insert the rawl plugs (A) in the holes made.
5. Screw the plastic bracket (B) to the wall with the Ø5.5 x 50 mm screw (C).
6. Screw the two brackets for supporting the product (D + E) to the horizontal tube of
the product like in Figure 1 with the Ø6 x 35mm screw (F).
7. Insert what you have assembled in Section 6 into the plastic piece (B). Fix well with
the Ø2,9 x 9,5mm fixing screw (H).
8. Place the cap (G) on the piece supporting the product (E).
Nº.
A
Ø 10 x 45 mm rawl plug
B
Plastic Bracket
C
Ø 5.5 x 50 mm screw
D
Plastic Bracket
E
Plastic Bracket
F
Ø 6 x 35 mm screw
G
Plastic Bracket Cap
H
Ø 2.9 x 9.5 mm fixig screw
I
Product
INSTALLATION AND SAFETY PRECAUTIONS (UNE-EN 60335 REGULA-
TION)
Before starting the heater, read the "Installation and Safety Precautions" carefully to ensure
proper operation of the heater.

PRECAUTIONS FOR INSTALLATION

The towel rail is designed for domestic or residential use. We recommend that the towel
rail is installed by a distributor or an approved professional. Make sure that the heater is
correctly connected to 220V-230V.
This appliance has been designed for installation in a residential room. The installation
14
ITEM
A
B
C
D
H I
E
F
G