Cleaning And Maintenance - MSW Motor Technics MSW-DA-20 Manual De Instrucciones

4. Fit the adapter handle to the sliding hammer and slip it over the adapter.
5. Hit the sliding hammer weight against its stop to pull out the dent.
ATTENTION: The time periods given for the adhesive to harden are
approximate and, when working with the device, observe the adhesive
manufacturer's recommendations and use your own experience.
3.3.
a) Store the device in a dry and cool place that is protected from moisture
and direct sunlight.
b) Dry all parts well after each cleaning
c) Inspect the device regularly for any damage and signs of wear and tear.
d) Use a soft, damp cloth for cleaning.

Cleaning and maintenance