Maintenance and cleaning
CAUTION
Risk of injury due to unforeseeable start-up. A temperature monitor switches the unit off auto-
matically in the event of overload and on again once it has cooled down.
Disconnect the power plug before carrying out any work on the unit.
NOTE
Do not use aggressive cleaning agents or chemical solutions. These agents can damage the
housing, impair the function of the device and harm animals, plants and the environment.
Clean the unit with clean water and a soft brush or sponge wherever possible. Remove stub-
born dirt with the aid of the recommended cleaning agents.
Cleaning the unit
Clean the unit as required, but at least twice a year.
• When cleaning the pump, pay particular attention to the impeller unit and the pump casing.
• Recommended cleaning agent for removing stubborn limescale deposits:
– Pump cleaning agent PumpClean from OASE.
– Vinegar- and chlorine-free household cleaning agent.
• After cleaning, thoroughly rinse all parts in clean water.
30