INSTALLATION INSTRUCTIONS
REQUIRED TOOLS
#1 and #2 Phillips
screwdrivers
Tin snips
(to cut damper, if needed)
Gloves
Saw
(saber, hole, or keyhole)
LOCATION
• The space between the cabinets must be 30"
wide and free of obstructions.
• If the space between the cabinets is greater than
30", use fi ller material to fi ll the gap between the
microwave oven and the cabinets.
• This microwave is for installation over ranges up
to 24" wide.
• If installing the microwave beneath smooth, fl at
cabinets, be sure to follow the instructions for
power cord clearance.
Pencil
Scissors
(to cut template, if needed)
Safety goggles
Ruler or tape measure
straight edge
Electric drill with 3/16", 1/2" and 5/8" bits
Duct and masking tape
Level
66" min
5
Carpenter square
(op onal)
Filler blocks or scrap wood
pieces (for top cabinet
spacing in recessed bo om
cabinet installa ons, if
needed)
Edge-to-edge stud finder
or hammer (op onal)
17-
"
1/8
30"min.
2"