• Portable multi sockets or port-
able power supplies may over-
heat and cause fire. Thus, do
not have a multi-plug behind
or in the vicinity of the product.
• The plug shall be easily ac-
cessible. If this is not possible,
a mechanism that meets the
electrical legislation and that
disconnects all terminals from
the mains (fuse, switch, main
switch, etc.) shall be available
on the electrical installation.
• Do not touch the plug with wet
hands.
• When unplugging the appli-
ance, don't hold the power
cord, but the plug.
1.4
Handling Safety
• This product is heavy, do not
handle it by yourself.
• Do not hold the product from
its door while handling the
product.
• Be careful not to damage the
cooling system and the pipes
while handling the product. Do
not operate the product if the
pipes are damaged, and con-
tact an authorized service.
1.5
• Contact the Authorized Ser-
vice for the product's installa-
tion. To prepare the product
for installation, see the inform-
ation in the user manual and
make sure the electric and
water utilities are as required.
If not, call an electrician and
plumber to arrange the utilities
as necessary. Failure to do so
may result in electric shock,
fire, problems with the
product, or injury.
• Check for any damage on the
product before installing it. Do
not have the product installed
if it is damaged.
• Place the product on a level
and hard surface and balance
with the adjustable legs. Oth-
erwise, the refrigerator may tip
over and cause injuries.
• The product shall be installed
in a dry and ventilated environ-
ment. Do not keep carpets,
rugs or similar floor covers un-
der the product. This may
cause risk of fire as a result of
inadequate ventilation!
EN / 6
Installation Safety