I.
Product features
Parts name
*Due to technological innovation, the descriptions of the product in this manual may not be completely consistent with your
refrigerator. Details are in accordance with the material item.
II.
Preparations for use
Installationlocation
4.
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the
refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator
from rusting and leaking electricity.The result of the total space of the room in which the refrigerator is installed being
divided by the refrigerant charge amount of the refrigerator shall not be less than 8 g/ M
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
5.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least
the top side, more than 100mm on both sides, and above 50mm at the back side of the refrigerator.
Dimensions in mm:
W
D
595
635
Note:Figure 1, Figure 2 only illustrate the space demand of the product
6.
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration and noise.
When the refrigerator is placed on such flooring materials as carpet, straw mat, polyvinyl chloride, the solid backing plates
should be applied underneath the refrigerator, so as to prevent color change due to heat dissipation.
H
A
B
2000
966
1202
No
Description
1
Fridge shelves
2
Crispercover
3
Vegetable and fruit crisper
4
Freezing drawers
5
Leveling feet
6
Door balcony
30mm
C(°)
E
130
50
3
.
of free space should be spared at
F
100