cleaning, fix the four corners of the door gasket first, and then embed it segment by segment into the door groove.
Interruption of power supply or failure of the refrigerating system
•Take care of the frozen foods in the event of an extended non-running of the refrigerating appliance (such as interruption
of power supply or failure of the refrigerating system).
•Try to open the refrigerator door as less as possible, in this way can food safely and freshly kept for hours even in hot
summer.
•If you get the power outage notice in advance:
1)
Adjust the thermostat knob to the high mode an hour in advance, so that foods get fully frozen (Do not store new food
during this time!). Restore the temperature mode to the original setting when power supply becomes normal in a
timely manner.
2)
You can also make ice with a watertight container, and put it in the upper part of the freezer, so as to extend the time
for fresh food to be stored.
Note: Once the refrigerator is used, you'd better use it continuously; and under normal circumstance, do not stop its
use, so as not to affect the service life.
Defrosting
This appliance is designed with automatic defrosting function, thus no need to defrost it manually.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In
case of any abnormality, please contact the after-sales personnel for visiting service.
Lamp type:LED light.
This product contains a light source of energy efficiency class (G).
This product contains a light source of energy efficiency class (G).
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheat?
Note: Electric shock and fire accident may be caused in case the power cord and plug is damaged or stained by
dust. If any abnormality, please unplug the power plug and get in contact with the vendor.
How to disassemble the parts.
Fridge door bottle rack:
Hold the bottle rack with both hands, and then push it up.
Fridge shelf:
Hold one end of the shelf, and lift it up while pulling it outwards.
VII.
Simple fault analysis and elimination
With regards to the following small faults, not every failure needs to be fixed by the technical service personnel; you can
try to solve the problem.
Case
•Completely non-
refrigeration
•Abnormal noise
Inspection
•Is power plug off?
•Are breakers and fuses broken?
•No electricity or line trip?
•Is refrigerator stable?
•Does refrigerator contact the wall?
Solutions
•Re-plug
•Opening the door and checking whether the lamp
is lit.
•Adjusting refrigerator's leveling feet.
•Off the wall.