Publicidad
Idiomas disponibles
Idiomas disponibles
◆
Under the Smart mode, press the Function key to select Smart until the corresponding gets flickering, and then press
the OK key for confirmation. The Smart function will get exited.
◆
When the Vacation or Fast Freezing or Fast Cooling function is enabled, the Smart function will be disabled
automatically.
★Fast Cooling
1) When this function is enabled, the fridge temperature is automatically set at 2℃, with the temperature reduced in the
rapid manner, so that foods can be kept in fresh condition with their nutrition not lost.
Under the Fast Cooling mode, the fridge temperature is subject to no adjustment.
2) Enabling the Fast Cooling function
◆
Press the Function key to select Fast Cooling until the corresponding icon gets flickering, and then press the
key within 5s for confirmation. If the OK is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast Cooling function
◆
Under the Fast Cooling mode, press the Function key to select Fast Cooling until the corresponding gets flickering,
and then press the OK key for confirmation. The Smart function will get exited.
◆
When the Vacation or Smart function is enabled, the Fast Cooling function will be disabled automatically.
★Fast Freezing
1)When the Fast Freezing function is enabled, the freezer temperature will be controlled at -32℃automatically, and after
26 hours of running, the Fast Freezing function gets exited. Cooling down the freezer temperature in a rapid manner is
beneficial to the prevention of food nutrition against lost and the preservation of freshness.
Under the Fast-Freezing mode, the freezer temperature is subjected to no adjustment.
2) Enabling the Fast-Freezing function
◆
Press the Function key to select Fast Freezing until the corresponding icon gets flickering, and then press the OK
key within 5s for confirmation. If the OK key is not pressed within 5s, the setting will be invalidated.
3) Exiting the Fast-Freezing function
◆
After a cumulative running period of 26 hours, the Fast Freeze function will exit automatically.
◆
Under the Fast Freezing mode, press the Function key to select Fast Freezing until the corresponding icon gets
flickering, and then press the OK key for confirmation, the Fast Freezing function will get exited.
◆
When the Smart function is enabled, the Fast-Freezing function will be disabled automatically.
★ Vacation
1）When the Vacation function is enabled, the
long time, you can set the Vacation function to keep the refrigerator running with low energy consumption, while ensuring
the fresh food compartment is free from undesirable smell and the freezer compartment operates normally.
Be sure to take out all foods from the fresh food compartment before setting this function.
Under the Vacation mode, the fridge temperature is subject to no change.
2）Enabling the Vacation function
◆
Press the Function key to select Vacation until the corresponding icon gets flickering, and then press the OK key
within 5s for confirmation. If the OK is not pressed within 5s, the setting will be invalidated.
3） Exiting the Vacation function
◆
Under the Vacation mode, press the Function key to select Vacation until the corresponding gets flickering, and
then press the OK key for confirmation. The Vacation function will get exited.
◆
When the Smart or Fast Cooling function is enabled, the Vacation function will be disabled automatically.
★ Power cut memory
In case of power failure, the refrigerator will maintain the operating state before power failure when power supply is
restored.
★ Power-on delay
In order to protect the refrigerator com
than 5 minutes), the compressor will not be started immediately after it is powered on.
★Over-temperature alarm (only after power outage)
When the refrigerator system is powered on, if the freezer sensor temperature is higher than -10℃, digits of the
freezer zone get flickering on the display. The freezer temperature can be displayed when any key is pressed, and
the normal display will be restored when any key is pressed again or after 10s.
★Door open alarm
If the fridge door is open for more than 3 minutes, buzzer alarms will be continuously issued, which can be stopped
when any key is pressed, but will be restored after 3 minutes if the door keeps open. The alarms will not be lifted
until the door is closed.
★Fault alarm
In case E0,E1,E2,EH, or EC is displayed on the operation panel, it indicates fault with the refrigerator. Please
contact the aftersales person for visiting service in such case.
fridge
temperature will be controlled at 14℃. When you are out for a quite
ressor from being damaged in the case of short-time power failure (i.e., less
p
OK
Publicidad
