WIKA ACS-10 Manual De Instrucciones página 81

5. Commissioning, operation
First, the pressure is approached up to the full scale value in order to measure the
contact resistances and to determine the rough position of the switch points. In the
second round, the switching accuracy is determined with increasing and decreasing
pressure.
EN
Following the measurement, the results are shown.
By tapping the "Proceed" button (1), the instrument proceeds through the dismounting
of the test item and performs an evacuation of the piping or hose pack into the internal
gas container.

WIKA Betriebsanleitung Kalibriersystem, Typ ACS-10 81