EN
26
Note: Clean the appliance if you have used it for a long period of time. In
particular, the water separation line and the water filters must be cleaned at
regular intervals.
1.
If the water separation pipe is blocked and no water is flowing down, but the
compressor and the water pump are still operating, first switch off the unit,
remove the water separation pipe and clean it. Clean each hole of the water
separation pipe thoroughly. Replace the water separation pipe after cleaning
and make sure it is seated correctly.
2.
Both the water tank and the large water container can be cleaned with a mild
detergent, warm water and a soft cloth. Then rinse both with clean water and
open the water drain cap on the bottom of the appliance and drain the water.
This will keep the unit hygienically clean, ensuring normal operation.
3.
If, when cleaning the appliance, you notice that there are still ice cubes on the
evaporator that cannot be easily removed, switch on the appliance and let it
start the ice making process. Then press the ON/OFF button for 5 seconds to
make the device start dispensing ice cubes. This melts the stuck ice cube and
makes it easier to remove.
Water separation line
Hole
Evaporator