UNPACKING/DELIVERY
SAFETY
CHANGES AND IMPROVEMENTS
OPERATION CAPABILITIES
CONVENTIONS
VISIBLE SYMBOLS ON THE MACHINE
revised 03/2018
06/2009
Advance constantly improves its products and reserves the right to make changes and improvements at its discretion without being
Any change and/or addition of accessory must be approved and performed by Advance.
environments, and to collect dust and light debris under safe operation conditions.
Forward, backward, front, rear, left or right are intended with reference to the operator's position, while on the driver's seat (25).
To unpack the machine carefully follow the instructions on the packing.
Upon delivery check that the packing and the machine were not damaged during transportation. In case of visible damages, keep
Check that the machine is equipped as follows:
–
Technical documents:
•
Sweeper User Manual
•
Electronic Battery Charger Manual
•
Sweeper Spare Parts List
–
No. 1 70 A fuse
The following symbols indicate potentially dangerous situations. Always read this information carefully and take all necessary
precautions to safeguard people and property.
cooperation of the person responsible for the machine operation. Most of the accidents that may occur while working or moving
around are caused by failure to comply with the simplest rules for exercising prudence. A careful and prudent operator is the best
guarantee against accidents and is essential for successful completion of any prevention program.
WARNING!
Carefully read all the instructions before performing any operation on the machine.
WARNING!
Do not wash the machine with direct or pressurized water jets.
WARNING!
obliged to apply such benefits to the machines that were previously sold.
This sweeper has been approved to clean (sweeping and vacuuming) compact and solid floors, in commercial and industrial
the packing and have it checked by the carrier that delivered it. Call the carrier immediately to fill in a damage claim.
The operator's cooperation is essential in order to prevent injury. No accident prevention program is effective without the total
X %
Do not use the machine on slopes with a gradient exceeding the specifications.
INSTRUCTIONS FOR USE
1464035000 - Terra™ 4300B
ENGLISH
3