Parts And Components; Before Use; Installation - cecotec bolero COOLMARKET COMBI 495 INOX Manual De Instrucciones

ENGLISH

1. PARTS AND COMPONENTS

Fig. 1
A. Refrigerator compartment
B. Freezer compartment.
1. Refrigerator's structure
2. Interior lighting (LED)
3. Refrigerator compartment shelves
4. Flexible wine shelf (optional accessory)
5. Air outlet
6. Fresh Drawer cover
7. Fresh Drawer (ideal compartment to keep meat and fish fresh)
8. Crisper Drawer cover
9. Crisper Drawer (ideal compartment to keep fruit and vegetables fresh)
10. Freezer compartment's top and middle drawers
11. Freezer compartment's bottom drawer
12. Ice-cube tray (interior)
13. Adjustable lower legs
14. Refrigerator compartment door
15. Door's top shelves
16. Bottle divider
17. Door's lower shelf
18. Door handle
19. Freezer compartment door
The graphics in this manual are schematic representations and may not exactly match the
product.

2. BEFORE USE

- This product includes a packaging designed to protect it during transport. Take the
refrigerator out of the box. You can keep the original box and other elements in a safe
place. This will help you prevent product damage when transporting it in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
62
Box contents:
- Bolero CoolMarket Combi 495 Inox Refrigerator
- Instruction manual

3. INSTALLATION

Before using the refrigerator for the first time, you must read these tips.
Warning
For proper installation, the refrigerator must be placed on a level surface of hard material
and of same height as the rest of the floor. This surface must be strong enough to hold a
completely loaded refrigerator.
The wheels should only be used to move the refrigerator forwards or backwards. Moving the
refrigerator sideways could damage the floor and roller heads. Fig. 2
Refrigerator ventilation
- To improve the refrigerator system's efficiency and to save energy, it is necessary to
ensure proper ventilation around the freezer to dissipate the heat. For this reason, you
should leave enough free space around the refrigerator.
- It is advisable to leave at least 50-70 mm of free space from the rear part of the refrigerator
to the wall, at least 100 mm space from the surface to the ceiling, at least 100 mm from the
side to the wall, and free space at the front to be able to open the door 130º. Check figure
3 for reference.
Please note
This refrigerator operates properly in the climate classes SN to T shown in the following table.
If the room temperature is below or above the range for which the refrigerator was designed,
it will not operate properly.
Climate class Room temperature
SN + 10°C a + 32°C
N + 16°C a + 32°C
ST + 16°C a + 38°C
T + 16°C a + 43°C
- Place the refrigerator in a dry place to prevent moisture damage.
- Keep the refrigerator away from direct sunlight, rain, or frost. Keep the refrigerator away
from heat sources like cookers, fires, or heaters.
ENGLISH
63
COOLMARKET COMBI 495 INOX