cecotec bolero COOLMARKET COMBI 495 INOX Manual De Instrucciones página 33

ENGLISH
Refrigerator stabilisation
Fig. 4
- For sufficient stabilisation and air circulation at the lower rear part of the refrigerator,
it may be necessary to adjust the lower legs. You can adjust them manually or using a
suitable wrench.
- To allow doors to close automatically, tilt the upper part back by about 10-15 mm.
Figure 4
A. Adjustable lower legs
B. Front wheel
C. Rear wheel
Changing the opening direction of the door
If desired, you can change the door's opening direction, from the right side (by default) to the
left side.
Warning:
- The refrigerator must not be connected to the power socket when you change the opening
direction of the door. Make sure to disconnect the plug from the power socket.
- Check figure 5 to check the tools you need.
- It is advisable that two people change the door's opening direction.
Fig. 5
A. Tools not supplied
1. 8-mm tube wrench
2. Flat-head screwdriver
3. Spatula
4. Crosshead screwdriver
5. Wrench
6. 8-mm wrench
B. Additional parts (included in the plastic bag)
7. Upper-left hinge
8. Upper-left hinge cover
9. Screw gap cover
10. Middle-left hinge
11. Left unblocker *2
12. Left doorstop *2
13. Allen key (4 mm)
64
Fig. 7
1. Self-tapping screw
2. Upper-right hinge cover
3. Electrical connector
4. Door switch
Fig. 8
5. Upper-left hinge cover
Fig. 9
6. Screws
7. Upper-right hinge
8. Electrical connector
Fig. 11
9. Screw gap cover
10. Left screw gap cover
Fig. 12
11. Upper-left side door cover
12. Left door connector
13. Upper-right side door cover
14. Right door connector
Fig. 13
15. Right upper door stop
16. Right upper door dowel
17. Self-tapping screw
18. Left upper door stop
19. Left upper door dowel
Fig. 15
20. Right lower door stop
21. Right lower door dowel
22. Self-tapping screw
23. Left lower door stop
24. Left lower door dowel
Fig. 17
25. Lower hinge
26. Special flange screw
27. Adjustable lower legs
ENGLISH
65
COOLMARKET COMBI 495 INOX