Publicidad
Idiomas disponibles
Idiomas disponibles
Fanaway EVO2 Installation Instructions
Thank you for purchasing this quality Fanaway product. To ensure correct function and safety, please
read and keep all instructions before using the product.
Read and Save These Instructions
This product conforms to UL standard
1.
WARNING -To avoid possible electrical shock, before installing or servicing your fan, disconnect the
power by turning off the circuit breaker of the fuse box to the outlet box.
2.
WARNING - To
reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked
"acceptable for fan support of 35 lbs (15.9 kg) or less" and use
the outlet box and/or support directly from building structure. Most outlet boxes commonly used for
the support of luminares may not be acceptable for fan support and may need to be replaced. Consult
a qualified electrician if in doubt.
3.
WARNING - To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed
control device.
4.
WARNING - To reduce the risk of personal injury, do not bend the blade brackets when installing the
blade brackets balancing the blades, or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
5.
CAUTIONS - All wiring must be in accordance with the National Electrical Code (ANSI/NFPA 70) and
local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
6.
To reduce the risk of injury to person, the fan must be mounted with a minimum of 7 feet clearance
from the bottom edge of the blades to the floor.
7.
After marking electrical connections, spliced conductors should be turned upward and pushed
carefully up into the outlet box. The wires should be spread apart with the grounded conductor and
the equipment-grounding conductor on one side of the outlet box.
8.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the instructions may cause
harmful interference to radio communications.
2 | P a g e
THANK YOU FOR PURCHASING
SAFETY PRECAUTIONS
and CSA STD. C22.2 NO.113
507
.
the mounting screws provided with
V2.1 (5/2022)
Publicidad
