Safety Precautions - Fanaway MYA Manual Del Usuario

Fanaway Mya Installation Instructions
Thank you for purchasing this quality Fanaway product. To ensure correct function and safety, please
read and follow all instructions before assembly, installation and use of this ceiling fan. Please keep
instructions for future reference.
Read and Save These Instructions
This product conforms to UL standard 507.
WARNING -To avoid possible electrical shock, before installing or servicing your fan, disconnect the
1.
power by turning off the circuit breaker of the fuse box to the outlet box.
WARNING - To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked
2.
"acceptable for fan support of 70 lbs (31.8 kg) or more" and use the mounting screws provided with
the outlet box and/or support directly from building structure. Most outlet boxes commonly used for
the support of luminares may not be acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
3. Suitable for use with solid-state speed controls
WARNING - To reduce the risk of personal injury, do not bend the blade brackets when installing the
4.
blade brackets balancing the blades, or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
CAUTIONS - All wiring must be in accordance with the National Electrical Code (ANSI/NFPA 70)
5.
and local electrical codes. Electrical installation should be performed by a qualified licensed
electrician.
To reduce the risk of injury to person, the fan must be mounted with a minimum of 7 feet clearance
6.
from the bottom edge of the blades to the floor.
After marking electrical connections, spliced conductors should be turned upward and pushed
7.
carefully up into the outlet box. The wires should be spread apart with the grounded conductor and
the equipment-grounding conductor on one side of the outlet box.
This equipment has been tested and found to comply with the limits for a Class B digital device,
8.
pursuant to part 15 of the FCC rules. These limits are to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the instructions may cause
harmful interference to radio communications.
9. CAUTION - To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan
before installing light kit.
10. The light kit plate weight is 1.56kg.
2 | P a g e
THANK YOU FOR PURCHASING

SAFETY PRECAUTIONS

M Y A - M E N A R D S V e r s i o n 1 . 0 1 / 2 0 2 1