Fanaway EVO2 Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
Fig. 10a
8.
After connecting the wires, spread them apart so that the green and white wires are on one side
of the outlet box and the black and blue wires are on the other side.
9.
Turn the connecting nuts upward and push the wiring into the outlet box.
10. Carefully insert the Remote Receiver above the hanger ball in the remainder spacing in the
mounting bracket. Take care not to damage or loosen any of the wiring.
7 | P a g e
ELECTRICAL WIRING DIAGRAM
1. Connect the household live supply wire (black) to
receiver input wire (black, AC IN L) as shown in Fig.
10.
2. Connect the household neutral supply wire (white)
to the receiver input wire (white, AC IN N).
3. Connect the household ground wire to the fan
bracket ground wire (green) and fan body ground
wire.
4. Connect the reveiver output wire (black, TO
MOTOR L) to motor live input wire (black, TO
MOTOR L).
5. Connect the receiver output wire (white, TO
MOTOR N) to motor neutral input wire (white, TO
MOTOR N)
6. Connect the receiver output wire (blue, FOR
LIGHT) to fan light live input wire (blue, FOR LIGHT)
7. Pull the metal safety cable on the security hook,
tight the safety cable (Fig.10a & Fig.10b)
Fig. 10b
(Fig. 10b)
V2.1 (5/2022)