Electrical Wiring Diagram - Fanaway MYA Manual Del Usuario

Fanaway Mya Installation Instructions
WARNING: To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts
supplied with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire
strands or connections. Fig. 7
6 | P a g e

ELECTRICAL WIRING DIAGRAM

hanging canopy
Fig. 7
Connect the household live supply
1.
wire (black) to receiver input wire (black,
AC IN L) as shown in Fig. 7
Connect the household neutral supply
2.
wire (white) to the receiver input wire
(white, AC IN N).
Connect the household ground wire to
3.
the fan mounting bracket ground wire
(green) and fan body ground wire.
Connect the reveiver output wire
4.
(black, TO MOTOR L) to motor live input
wire (black, TO MOTOR L).
Connect the receiver output wire
5.
(white, TO MOTOR N) to motor neutral
input wire (white, TO MOTOR N)
Connect the receiver output wire (blue,
6.
FOR LIGHT) to fan light live input wire
(blue, FOR LIGHT)
After connecting the wires, Turn the
7.
connecting nuts upward and push the
wiring into the fan hanging canopy.
Carefully put the Receiver into the fan
8.
hanging canopy. Take care not to damage
or loosen any of the wiring.
M Y A - M E N A R D S V e r s i o n 1 . 0 1 / 2 0 2 1