HotSpring HIGHLIFE Serie Manual Del Propietário página 19

TEMPERATURE LOCK
Press on Home screen to display Temperature Lock.
The Temperature Lock feature prevents changing the desired water
Press and hold ON or OFF for
approximately 4 seconds to activate
or deactivate.
SPA LOCK
Press on Home screen to display Spa Lock.
When activated, the Spa Lock feature disables all functions on the
control panel.
Press and hold ON or OFF for
approximately 4 seconds to activate
or deactivate.
LIGHTS TIMER
Press on Home screen to display Lights Timer.
When activated, the exterior lights of the spa will come on 5 seconds
Press ON or OFF to activate or deactivate.
SUMMER TIMER
Press on Home screen to display Summer Timer.
will remain on for approximately 5 minutes pushing water through
the heater to cool it down.
• Both heater and circulation pump will remain off for eight hours. The
circulation pump and heater will automatically shut down for the
same eight hours every day until the Summer Timer is deactivated.
• It is recommended to activate the Summer Timer in the morning so
that the spa is off during the hottest part of the day and so that the
circulation pump will start up again in the evening when you are
ready to enjoy the spa.
Press ON or OFF to activate or deactivate.
English Spanish
temperature setting. All other
control panel functions will
operate normally while the
Temperature Lock is "ON".
The control panel will not respond
to anything except on the
Home screen.
later will remain lit for 6 hours and
repeat the cycle every 24 hours
from activation time.
• The Summer Timer can be
activated during extremely hot
summer months to help maintain
set water temperatures.
• Activating the Summer Timer
causes the heater to immediately
shut down. The circulation pump
Page 16
French
TEMPERATURE ºF/ ºC SETTING
Press on Home screen to display first Settings screen, then press
to display Temperature in second Settings screen .
SCREEN/LOGO LIGHT BRIGHTNESS
Press on Home screen to display first Settings screen, then press
to display Brightness in second Settings screen.
Press if the box is dark to activate the auto brightness
feature, a sensor (located to the left of LCD screen)
will automatically adjust the LCD to the ambient
lighting conditions. Press and hold AUTO for 5
seconds to change to LOGO LIGHT mode.
Press or
manually increase or decrease the brightness of the
remote's screen. Press and hold either arrow to
continuously change the brightness setting. Press in
LOGO LIGHT mode to change the brightness setting.
LANGUAGE
Press on Home screen to display first Settings screen, then press
to display the current language in second Settings screen.
Press to display Select Language screen.
Press to start the conversion process. A black reset screen
will appear and begin the converting process. The conversion
is finished once the Home screen reappears.
Press to return to second Settings screen if check mark icon
is not pressed. Screen will automatically revert back after 10
seconds of non activity.
Press ºF or ºC to activate
either Fahrenheit or Celsius
temperature.
Auto
Brightness
Sensor
to turn AUTO brightness off and
The control panel screens can be
viewed in different languages
(ENGLISH illustrated).
NOTE: Press to see more
languages.
Press on the new desired
language.
Operating Instructions