Publicidad
PINSEEKER™ WITH VISUAL JOLT®
Ever had trouble getting the distance to the flag? This advanced mode allows easy flag acquisition without inadvertently
getting distances to background targets (i.e., trees) with stronger signal strength.
To use PinSeeker™, align the aiming circle reticle onto the flag that you want to measure the distance. Then, press and hold
the Power/Fire button and move the laser slowly across an area until the aiming circle at the center of the display is located
over the flag or desired object. If the laser beam recognized more than one object (i.e., the flag and a group of trees behind
it), only the distance to the closest object (the flag) would be displayed. The JOLT Technology provides two short pulses to
confirm that the distance displayed is to the flag. Then, the red ring around the display (Visual JOLT Indicator) is activated,
confirming the laser has ranged the correct target via PinSeeker™. Sometimes, the laser beam only sees one object in its
path. In this case, the distance is displayed, but no JOLT indication will be provided because more than one object was not
acquired.
TIP: While pressing the Power/Fire button, you can move the device slowly from object to object and
intentionally force the laser to hit multiple objects to ensure that you only display the closest objects
recognized by the laser. Once the device has shut off, the unit will always default to the last mode
used.
*For ease of use, the device will always be in PinSeeker™ Mode.
DISTANCE UNITS: YARDS OR METERS
To set the distance units between Yards or Meters, press Fire/Power to turn the unit on, then press and hold the Mode
button until the display is blinking. Press the Mode to switch from Y (yards) or M (meters). Press Fire/Power button to set the
distance units.
Note: If the Red Display is being used, the first setting is to adjust the Display Brightness. The second setting is to select
the Distance Units. Follow the instructions above to complete.
DUAL DISPLAY
To adjust the Dual Display from Black to Red, press the button on the left side of
the rangefinder.
Dual Display Button
HOME ELEVATION
To customize your Elements compensated distances for your game, you will want to set the home elevation setting to
where you play most often. Adjusts for pressure changes wherever you are playing. We suggest adjusting Home Elevation
in the Bushnell Golf app.
To set the Home Elevation in the Pro X3 Set Up menu:
1. Press and Hold the Mode button on top of the ProX3 to enter Set Up mode.
2. Press the Fire/Power button to move through each setting to the "ELE" blinking screen (see right).
3. Press the Mode button to enter Home Elevation set up. The screen will change to "AdJ"
blinking(see right).
4. Press the Fire/Power button to enter the first number, this will be indicated by the number
blinking.
5. Press the Mode button to change the number.
6. When the correct number is selected, press Fire/Power and the next number to the right will
blink and can be changed. Continue until the full number is correct for Home Elevation and
press Fire/Power to set.
7. Press Fire/Power to exit Set Up Mode.
Click to Return to the Table of Contents
6
Black Display
Red Display
Settings
can also
be accessed
through the
Bushnell Golf
App!
ELE
0000
ft
Home Elevation
Adjustment Screen
1250
ft
Home Elevation
Number Selection
Screen
Publicidad
Solución de problemas
