Technical Data; Accessory Tools - Permissible Diameters - Hilti NURON SF 6-22 Manual De Instrucciones

Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group
4

Technical data

Rated voltage
Weight in accordance with EPTA Procedure 01,
without battery
Speed
Torque (soft joint)
Impact speed
Ambient temperature for operation
Storage temperature
4.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.2 Accessory tools – permissible diameters
Ø range of keyless chuck
Ø wood drill bits (hardwood)
Ø wood drill bits (softwood)
Ø drill bits for metal
Ø drilling in concrete/masonry (hammer-action
drilling)
4.3 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
*2275217*
1st gear
2nd gear
)
pA
)
pA
2275217
SF 6-22
21.6 V
DC
2.0 kg
0 /min ... 490 /min
0 /min ... 2,000 /min
≤ 65 Nm
•/•
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
SF 6-22
1.5 mm ... 13 mm
1.5 mm ... 20 mm
1.5 mm ... 32 mm
1.5 mm ... 13 mm
•/•
SF 6-22
74.5 dB(A)
5 dB(A)
SF 6H-22
21.6 V
DC
2.0 kg
0 /min ... 490 /min
0 /min ... 2,000 /min
≤ 65 Nm
36,000 /min
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
SF 6H-22
1.5 mm ... 13 mm
1.5 mm ... 20 mm
1.5 mm ... 32 mm
1.5 mm ... 13 mm
4 mm ... 12 mm
SF 6H-22
94.5 dB(A)
5 dB(A)
English 21