Replacing The Fuse; Cleaning And Maintenance - Mobicool MCG 15 Instrucciones De Uso

MCG15
➤ Take out the contents of the cooler.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the lid open.
➤ Wipe off the defrosted water.
6.10

Replacing the fuse

!
WARNING! Electrocution hazard
Failure to obey this warning will result in death or serious injury.
Disconnect the power supply and the connection cable before you
replace the device fuse.
➤ Disconnect the power supply to the device.
➤ Remove the connection cable.
➤ Replace the fuse (8 A 32 V) as shown (fig. 4, page 3).
➤ Reconnect the power supply to the device.
7

Cleaning and maintenance

!
WARNING! Electrocution hazard
Failure to obey this warning could result in death or serious injury.
Always disconnect the device from the power supply before you
clean and service it.
A
NOTICE! Damage hazard
Failure to obey these instructions may result in damage to the
device.
 Never clean the cooler under running water or in dish water.
 Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
EN
Cleaning and maintenance
15