Waeco ASC 6300 G LE Instrucciones De Uso página 19

13.3.1 Creating user codes
1. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER
3. Use the cursor key
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
4. To acces the ADM administrator menu enter the password
Service.
5. Enter the administrator code
Insert ADM Code
Note For security reasons, a new administrator code must be selected each time, but not
will deactivate the entire function.
6. Enter the new administrator code:
ADM AREA
Insert new code
7. Confirm the new administrator code:
ADM AREA
Confirm new code
8. Use the cursor keys
ADM AREA
User number
9. Create the four-digit personal user code. Once a code is created here, the A/C service unit can then only be
operated using this code.
ADM AREA
User number
Insert new code
to confirm.
to select Service and press
(default setting) and press
0000
or to select the user.
or to select Other selections.
ENTER to confirm.
and press
9786
----
ENTER
----
----
----
1
1
----
ENTER to confirm.
to confirm:
EN
as this
0000
19