Publicidad
Idiomas disponibles
Idiomas disponibles
1. For Safe Operation
1.1.
Explanation of symbols and safety warnings
Read operator´s instruction
book before operating this
machine.
Read, understand and
follow all warnings.
Use the chain saw with
two hands
WARNING!
In normal conditions of use, this machine may exceed daily level of personal
exposure to noise for the operator equal to or greater than 85 dB (A)
1. Never use only gasoline as fuel
2. Use min. 90-octane fuel mixed with special 2-stroke oil or a 2-stroke special
fuel.
3. Mixing ratio fuel: oil-40:1
1.2.
Safety information
1. Never operate a chain saw when you are fatigued, ill, or upset, or under
the influence of medication that may make you drowsy, or if you are
under the influence of alcohol or drugs
2. Use safety footwear, snug fitting clothing and eye, hearing and head
protection devices. Use the vibration-proof glove.
3. Keep the saw chain sharp and the saw. including the AV system. well
maintained. A dull chain will
increase cutting time, and pressing a dull chain through wood will in-
crease the vibrations transmitted to your hands. A saw with
loose components or with damaged or worn AV buffers. will also tend to
have higher vibration levels. All the above mentioned precautions do
not guarantee that you will not sustain white finger diseaseor carpal
tunnel syndrome.
Therefore, continual and regular users should monitor closely the con-
dition of their hands and fingers. If any of the above symptoms appear,
seek medical advice immediately.
4. Eliminate all sources of sparks or flame (i.e. smoking, open flames, or
work that can cause sparks) in the areas where fuel is mixed, poured,
or stored. Always use caution when handling fuel. Wipe up all spills and
26
RISK OF DAMAGE HEARING
2
Translation of original operating instructions
Warning! Danger of kickback.
Wear hand protection!
Wear head, eye and ear
protection.
Publicidad
