Troubleshooting - cecotec BOLERO DRESSCODE 2000 AUTODOSIS Manual De Instrucciones

ENGLISH
Maintenance and lime prevention advice:
1. Remove the laundry as soon as possible from the drum.
2. Use the AutoClean programme to clean the drum.
3. Clean the filter (it is advisable to do it after the AutoClean programme).
4. Do not exceed the maximum load.
5. Use the adequate products in the recommended amounts.
6. Leave the door open after every wash.
Transport and storage
Two people are needed to handle the washing machine. Never lift the device by grabbing the
surface during transport.
1. Unplug the device from the electric circuit. Do not pull the cord. Always disconnect the
plug.
2. Close the stopcock.
3. Disconnect the drain and inlet hoses.
4. Remove the water from the hoses and the device.
5. Place the transport bolts.
Electrical connections
Use only a grounded electrical outlet.
- The power supply must be adequate for the 10 A rated current of the machine.
- Do not use an extension cord or multiple sockets.
- The power cord must be exclusively replaced by an authorised electrician.

8. TROUBLESHOOTING

Your laundry is equipped with automatic safety functions.
This system allows you to early detect faults and the safety system can react adequately.
These faults are often so minor that they can be quickly resolved.
Draining warning
If the pipe is pressurised, emptying will not run smoothly.
In case it is not completely drained for a long period of time, the draining failure icon will be
displayed and the display will indicate "F03" to warn the user.
The washing machine does not turn on, there is no indicator light on
Check:
- The washing machine is plugged to the power socket.
- The power socket works. Check with another electronic device.
76