• Please check if the cooling capacity of the
device is suitable for storing the food or med-
icine you wish to cool.
• Food may only be stored in its original pack-
aging or in suitable containers.
• Opening the cooling device for long periods
can cause significant increase of the tem-
perature in the compartments of the device.
• Clean regularly surfaces that can come in
contact with food and accessible drainage
systems.
• If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mold devel-
oping within the device.
A
NOTICE!
Damage hazard
• Check that the voltage specification on the
data plate corresponds to that of the energy
supply.
• Only connect the cooling device as follows:
– With the DC connection cable to a DC
power supply in the vehicle
– Or with the AC connection cable to an AC
power supply
• Never pull the plug out of the socket by the
cable.
• If the cooling device is connected to a DC
outlet, disconnect the cooling device and
other power consuming devices from the
battery before connecting a quick charging
device.
• If the cooling device is connected to a DC
outlet, disconnect the cooling device or
switch it off when you turn off the engine.
Otherwise you may discharge the battery.
• The cooling device is not suitable for trans-
porting caustic materials or materials con-
taining solvents.
• The insulation of the cooling device contains
flammable cyclopentane and requires
special disposal procedures. Deliver the
cooling device at the end of its life-cycle to
an appropriate recycling center.
• Do not use electrical devices inside the cool-
ing device unless they are recommended by
the manufacturer for the purpose.
• Do not place the cooling device near naked
flames or other heat sources (heaters, direct
sunlight, gas ovens etc.).
• Risk of overheating!
Ensure at all times that there is a minimum of
50 mm ventilation on all four sides of the
cooling device. Keep the ventilation area
free of any objects that could restrict the air
flow to the cooling components.
Do not place the cooling device in closed
compartments or areas with none or minimal
air flow.
• Ensure that the ventilation openings are not
covered.
• Do not fill the inner container with ice or flu-
ids.
• Never immerse the cooling device in water.
• Protect the cooling device and cables
against heat and moisture.
• The device shall not to be exposed to rain.
Intended use
The cooling box is suitable for cooling food.
The cooling box is also suitable for use on vehi-
cles. The cooling box is designed to be oper-
ated from a DC power supply socket of a
vehicle or from an AC power supply.
The cooling box is also suitable for camping
use.
The cooling box is intended to be used in
household and similar applications such as
• Staff kitchen areas in shops, offices and
other working environments
• Farm houses
• Clients in hotels, motels and other residential
type environments
• Bed and breakfast type environments
• Satering and similar non-retail applications
The cooling box is not suitable for:
• Storage of corrosive, caustic or solvent-con-
taining substances
This cooling box is only suitable for the
intended purpose and application in accor-
dance with these instructions.
4445102511
10