Troubleshooting And Repair; Frequently Asked Questions - Mayku Multiplier Instrucciones De Instalación

WARNING
Make sure to wear hearing protection when doing
tank draining/venting. Only use tools as described
in 6.1.
Tank draining process:
1. Follow on-screen instructions (Menu >
Maintenance) - more information at
platform.mayku.me
6.2. How to inspect the product
6.2.1. Weekly inspection tasks
Task Action
Check the seal Wipe clean the seal
for signs of dirt with a damp cloth.
Check the bed for Wipe down with a
debris or dirt damp cloth, or remove
for better cleaning.
Check heaters for signs Do not attempt to fix.
of cracking or failure. Contact customer
support at support@
mayku.me.
6.2.2. Monthly inspection tasks
Task Action
Drain the tanks Follow the on-screen
maintenance
instructions in the
settings menu.
Check the heat Clean gently with
temperature sensor a damp cloth or
cotton swab.
Check the heat reflector Wipe down the
heat reflector.
Check the rail Apply recommended
lubrication lubricant if dry.
18

7. Troubleshooting and repair

7.1. How to identify and solve problems
WARNING
This product is not intended for end user repair
due to specialised pressure equipment inside the
machine. Opening or modifying the machine will
void your warranty and could cause serious injury
or death.
Error Cause Solution
Machine leaks Seal is dirty or Clean seal
when forming. in-correctly and ensure it
fitted. is properly set
into the dome.
Plastic dips Temperature Make sure the
or raises too sensor is temperature
much during obstructed sensor is clean
heating. or dirty. and free from
debris.
Plastic bursts Mold has Use a different
during forming. too many design of mold
undercuts that better
or improper caters for the
elements for properties of
thermoforming. thermoforming.
Plastic does not Machine was Close and
form around left closed too lock the
molds properly. long before machine faster
locking and to maintain
forming, plastic
allowing the temperature.
sheet to cool.
Error code Internal Report to
on display. electronics Mayku at
failure. support@
mayku.me.
Mayku Multiplier

7.2. Frequently asked questions

Question Answer
Where can I purchase Sheets can be
sheets for my machine? purchased on
our website by
visiting: materials.
mayku.me
How much pressure The Multiplier uses
does the Multiplier use? a maximum of 60PSI
(4.1 Bar) in the dome
to form the sheet,
and a maximum of
175PSI (12 Bar) in the
tanks for air storage.
What is the maximum The Multiplier can form
temperature of sheets up to
the Multiplier? 220°C (428°F).
How long does a form A form on the Multiplier
take on the Multiplier? normally takes between
5-10 minutes.
For further information please visit: platform.mayku.me
8. Disposal
8.1. Disposal of electronic components
The symbol on the product, the accessories or
packaging indicates that this device shall not be
treated as unsorted municipal waste, but shall be
collected separately. Dispose of the device via a
collection point for the recycling of waste electrical
and electronic equipment if you live within the EU and
in other European countries that operate separate
Installation and User Instructions
collection systems for waste electrical and electronic
equipment. By disposing of the device in the proper
manner, you help to avoid possible hazards for the
environment and public health that could otherwise
be caused by improper treatment of waste equipment.
The recycling of materials contributes to the
conservation of natural resources.
8.2. Disposal of packaging waste
The packaging is made of environmentally friendly
materials, which may be disposed through your local
recycling facilities. By disposing of the packaging and
packaging waste in the proper manner, you help to
avoid possible hazards for the environment and public
health. The symbol on the packaging indicates that
the packaging is made of PAP.
8.3. Environmental commitment
At Mayku we are working towards a sustainable
future. Where people have the power to create, not
just consume. We consider the environmental impact
of every product we make as well as the materials
that work with them. That's why Mayku Sheets are
made out of as much recycled content as possible
without compromising quality. We have also ensured
that they are fully recyclable - so you can put them in
your regular household recycling waste. More than a
machines company Mayku is a community of Makers.
And we need you to join us in creating a sustainable
future. Please help us care for our environment by
recycling Mayku products and consumables whenever
possible.
9. Warranty
To find out about the Warranty service available to our
registered users, please see our Warranty Terms at:
warranty.mayku.me
19