Publicidad
Idiomas disponibles
Idiomas disponibles
Parameter
Unit
The A-weighted
emission sound pressure
level at workstations,
exceeds 70 dB(A) but
does not exceed 80
dB(A) - about 78 dB(A),
uncertainty is 3dB(A).
The measurement
was performed under
normal operation at
the point of 1m away
from the machine and
height 1.6m away from
the operator standing
on the floor wearing
ear protection.
2.4. Product elements
See page 9.
2.5. Understanding the user interface
See page 9.
2.6. Explanation of auditory and visual signals
The Multiplier uses on-screen commands and auditory
beeps to convey instructions.
The Mayku logo lights up when the machine is turned
on.
3. Safety instructions
Read this important information carefully before
you use the Mayku Multiplier, and keep it for future
reference. Failure to follow all the instructions listed may
result in electric shock, fire or serious personal injury.
Mayku accepts no responsibility for injury to yourself
or others, or damage to property or the Multiplier, nor
will the warranty apply should the Mayku Multiplier
8
and related materials be used inappropriately or if the
instructions are not followed correctly.
DANGER
• Before plugging the Mayku Multiplier into the mains
electrical supply, check that the voltage and power
supply comply with the specifications indicated
on the rating plate of the appliance. You will find
this information on the sticker on the back of the
machine.
• The heaters inside the dome of the Mayku Multiplier
can become extremely hot under operation and
may cause serious burns. Do not touch under
operation.
• When a sheet has been formed in the Mayku
Multiplier, it will remain hot for a period of time. Do
not touch the sheets until they have cooled.
• The Mayku Multiplier melts plastic sheets and other
materials which may emit fumes and odours under
normal circumstances or if overheated. Always use
the Mayku Multiplier in a well ventilated area.
• Never cover the ventilation holes on the top, back or
underneath of the Mayku Multiplier.
• To prevent the risk of electrical shock, do not
immerse the Multiplier, power cord, plug, or any
non-removable parts of the Multiplier in water or any
other liquid.
• Never allow any liquid or powders to get onto or
inside of the Multiplier.
• Do not use the Multiplier with wet hands.
• Do not orientate or operate the Multiplier upside
down or on its side.
• Disassembly of the Multiplier should be performed
by a certified Mayku repair specialist only.
• The use of attachments, not specifically
recommended by the manufacturer, shall not be
used as they may cause personal injury or damage
to the Multiplier.
• Do not replace any part of the Multiplier with a third-
party component.
• Do not use any flammable or potentially explosive
materials in conjunction with the Multiplier either as
sheets or templates.
Mayku Multiplier
Front:
A
C
Internal:
I
J
Control panel:
O
P
N
R
S
T
Installation and User Instructions
Back:
B
E
D
G
Base:
K
L
A.
Handle
B.
Lock Sheet
C.
Air Vent
D.
Lock Machine
E.
Air Accessory Connector
F.
Power Switch
Q
G.
Plug Socket
H.
Fuse
I.
Forming Bed
J.
Heat Sensor
K.
Locking RIng
L.
Rear (Dome) Safety Release Valve
M. Front (Tank) Safety Release Valve
N.
On-Screen Instructions
O.
Up
P.
No
Q.
On/Off Button
R.
Down
S.
Yes
T.
Menu
F
H
M
9
Publicidad
Solución de problemas
