Publicidad
Idiomas disponibles
Idiomas disponibles
• This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance 20cm
between the radiator & your body.
The full text of the FCC certification is available at the
following internet address: compliance.mayku.me
WARNING
Changes or modifications to this unit not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
3.6. IC compliance statement
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including
interference that may cause undesired operation of
the device.
NOTICE
This equipment complies with IC RF radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
a minimum distance of 20 centimetres between the
radiator and your body.
4. Preparation
4.1. How to transport and store the Mayku Multiplier
WARNING
Ensure that the Multiplier is on a stable surface
before use. Moving the Multiplier during use is
dangerous and may result in injury or death.
4.1.1. Dimensions and mass
12
Unboxed
Dimensions: 585mm (L) x 515mm (W) x 420mm (H).
Weight: 59kg (130lbs)
Quick Start Guide:
Get to know The Multiplier
515mm
585mm
Quick Start Guide:
Quick Start Guide:
Get to know The Multiplier
Get to know The Multiplier
Back:
Plug in and
Back:
Back:
power on
Plug in and
Plug in and
power on
power on
420mm
Air Accessory
Connector
Air Accessory
Air Accessory
Connector
Connector
Now follow
the on-screen
instructions
Turn on
Now follow
Now follow
the on-screen
the on-screen
instructions
instructions
Turn on
Turn on
Plug Socket
Plug Socket
Plug Socket
Boxed
Dimensions: 700mm (L) x 700mm (W) x 640mm (H).
ActivationLeaflet_090322.indd 1-4
Weight: 68kg (149lbs)
ActivationLeaflet_090322.indd 1-4
ActivationLeaflet_090322.indd 1-4
700mm
700mm
640mm
4.1.2. Lifting, handling and transporting the product
To lift and handle the product safely:
1. Make sure that your path is clear from obstacles.
Make sure that surfaces are not wet or slick.
2. Wear proper protective shoes and gloves.
3. Make sure that the machine is closed and both
locks are set to the "locked" position.
4. Use the top handle or hold the base to lift the
machine. WARNING! Always carry out lifting with
more than one person.
5. Put the machine in the correct location. NOTICE
Make sure that both safety release valves are not
blocked when putting down the machine.
Mayku Multiplier
WARNING
The Multiplier shall be placed on a surface that is
rated to the weight of the machine. (59KG, 130lbs)
Switching off your machine
To transport the product safely:
Front:
Switching off your machine
Switching off your machine
Switch your machine off using the power switch on
the control panel and the mains switch on the back
1. The Multiplier should be shipped in the box included
of the machine when not in use.
Front:
Front:
Switch your machine off using the power switch on
Switch your machine off using the power switch on
Handle
the control panel and the mains switch on the back
the control panel and the mains switch on the back
Lock Sheet
with the machine, ensuring padding on either side
of the machine when not in use.
of the machine when not in use.
Handle
Handle
Lock Sheet
Lock Sheet
and front/back of the machine.
2. The packaged machine shall be strapped in transit
Air Vent
Lock Machine
Power Switch
to avoid excess movement.
Air Vent
Air Vent
Lock Machine
Lock Machine
Power Switch
Power Switch
Control Panel:
Up
No
On/Off Button
4.1.3. Storing the product / storing during intervals in
Control Panel:
Control Panel:
On-Screen
Up
Up
No
No
On/Off Button
On/Off Button
Fuse
Instructions
normal use
On-Screen
On-Screen
Fuse
Fuse
Instructions
Instructions
Down
Yes Menu
To store the product safely:
Down
Down
Yes Menu
Yes Menu
1. The machine shall be used and stored on a strong
and stable surface.
2. Ensure the machine is stored in the closed position
at all times.
4.2. How to install the Mayku Multiplier
WARNING
The Multiplier is a heavy machine, and requires a
minimum of (2) people to lift. Do not attempt to lift
the machine by yourself.
4.2.1. Removal of the transport and packaging
restraints
The Multiplier is shipped in a reinforced cardboard box
strapped to a pallet.
Follow these instructions to remove transportation
materials:
1. Cut the plastic shipping straps using a knife or
scissors.
2. Remove the cardboard lid.
3. Slide the cardboard shipping box upwards over the
machine.
NOTICE
Packaging materials should be kept for future
transportation purposes.
Installation and User Instructions
Turn off
Power off
Turn off
Turn off
Power off
Power off
4.2.2. Unpacking the product
Once the cardboard lid and shipping box have been
Keep the lid of the machine
closed when not in use.
removed follow these steps:
Keep the lid of the machine
Keep the lid of the machine
closed when not in use.
closed when not in use.
1. Remove the quick start guide, user manual and tool
kit from the foam lid.
09/03/2022 12:22
2. Lift off the foam lid.
09/03/2022 12:22
09/03/2022 12:22
3. Remove the four foam side panels.
4. Remove the angled foam blocks.
5. Follow the lifting instructions in 4.1.2.
6. The machine shall be positioned on a strong and
stable surface.
4.2.3. Packaging contents
Your delivery will contain the following items:
A.
Multiplier machine (One)
B.
Mains cable (One)
C.
Quick start guide (One)
D.
Installation and user instructions (One)
E.
Set of maintenance tools
A
H OT S UR FAC E
Ea. Allen keys (Two)
Eb. Microfiber cloth (One)
B
C
D
Eb
Ea
13
Publicidad
Solución de problemas
