Nuface NuBODY Manual Del Usuario página 9

H OW TO U S E YO U R N U B O DY D E V I C E
Get ready to Smooth and Tone.
The instructions below are designed to provide the most effective results when followed
correctly. Note: For best results, you may choose to focus on a specific area of concern
within the treatment area for the full 5 minute treatment cycle and then repeat over other
areas as necessary.
1) Cleanse the selected treatment area with an oil-free cleanser. Note: Any cream, lotion, self
tanner, and/or oil-based products on the skin can block the microcurrent.
Note: Shave any excessive hair in the treatment area as it can create a tingling sensation.
2) Important: Apply a mask-like layer of NuFACE Microcurrent Activator in sections within the
selected treatment area.
Note: Always apply a NuFACE Microcurrent Activator when using your NuBODY Device.
Reapply if skin becomes dry during treatment to avoid any uncomfortable sensations.
3) Unplug the power adapter from your NuBODY device.
4) Turn ON NuBODY by pressing the ON/OFF button. Ascending tonal beeps will sound. Select
your preferred intensity level.
5) Adjust the intensity level up or down by pressing the power button until you reach your comfort
level. As you move between the three (3) intensity levels, NuBODY will emit a tonal beep and the
number of blue LED lights will change.
Intensity Levels:
• Minimum Intensity: First Light Illuminated
• Medium Intensity: First & Second Lights Illuminated
• Maximum Intensity: All Three Lights Illuminated
6) Begin treatment by gliding the device in an upward motion as shown in the illustration below.
7) For stubborn areas, such as dimpled or uneven skin, hold the device on the target area for 2-3
beeps to provide a more targeted treatment.
8) Treat for 5 minutes until the device automatically powers OFF. You may continue to treat other
areas for an additional 5 minutes per area.
9) After treatment is complete, massage any excess Microcurrent Activator into skin for additional
skincare benefits.
10) Turn OFF the NuBODY Device after treatment. A descending audible beep is emitted notifying
you that your device is turning OFF. See the "CLEANING" section for proper cleaning instructions.
Note: The NuBODY Device will automatically shut off after 5 minutes of use.
Important: Download the NuFACE APP for additional how-to instructions, and customized
treatment options. You can download it from the App store or the Google Play Store. To pair
your device, in the App, click on 'Add Device' and follow the on-screen instructions to connect.
The NuFACE app is available in many countries around the world and supports Chinese, Spanish,
German, French, and Korean languages.
T R E AT M E N T F R EQ U E N CY
• Use 5 minutes a day per treatment area.
• For the first 60 days, use 5 times per week.
• After 60 days, use 2-3 times per week for maintenance.
• Allow 24 hours between treatments.
R E S U LT S
Results may vary based on skin type and skin condition. Best results are achieved with regular use.
This is not a weight loss product.
7