Descargar Imprimir esta página

Columbus Kamado Manual De Uso página 18

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly instructions
NL
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
Onderstel:
Ensure that the lid is closed prior to assembly.
Ensure that the lid is closed prior to assembly.
4
2
E
Position the parts on a flat surface that will not scratch the finish of the nest components, paying close
STAP 1 - Bevestig de bovenste (4 en 5) en onderste verbindingsstrips (2 en
attention to the joint overlap in illustration the 2pcs Upper cross brace(4&5) and 2pcs Lorer cross brace(2&3).
STEP 1 -
3) aan elkaar met de meegeleverde schroeven (A) en moeren (E) zoals in de
Using the given hardware and hand tighten the braces with screw A + nut F.
bovenstaande afbeelding. Draai de schroeven met de hand vast.
Assembly instructions
Assembly instructions
1
C
H
G
8
(Joining the two halves assembled in step l) Stand the section 1 upright, and place the upper cross
STAP 2 - Bevestig de bovenste verbindingsstrips (4 en 5) aan de poten van het
STEP 2 -
braces (4&5) close to section 1. Inserting truss head screw C through the hole of section1
onderstel door poot (1) aan de bovenste verbindingsstrips te verbinden met
and section 4&5 and install K Keps nut and tighten securely.
bout (C) en moer (J) zoals in de bovenstaande afbeelding. Draai de schroeven
(Installing the lower cross braces and casters) Place the assembled lower cross braces (2&3) under section 1,
met de hand vast.
Stand the section 6 upright to make it close to section 1 and secrion 4&5. Inserting screw B through
STEP 3 -
section 4&5 and section 6, install G Keps nut and tighten securely.Next insert the threaded caster stem
through the hole in the end of the lower cross brace then through the riser and finally the riser brace.
Install (H) flat washer and (I) Keps nut, repeat this at the remaining (3) aster locations and securely tighten.
J
18
A
5
3
5
B
4 en 5
F
6
2 en 3

Publicidad

loading