Descargar Imprimir esta página

Columbus Kamado Manual De Uso página 60

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly instructions
ES
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
IMPORTANT - Remove any packaging before use, but retain the safety instructions and store them with this product.
Plataforma móvil:
Ensure that the lid is closed prior to assembly.
Ensure that the lid is closed prior to assembly.
4
2
F
PASO 1 - Fije los listones de unión superior (4 y 5) e inferior (2 y 3) entre sí con
Position the parts on a flat surface that will not scratch the finish of the nest components, paying close
attention to the joint overlap in illustration the 2pcs Upper cross brace(4&5) and 2pcs Lorer cross brace(2&3).
STEP 1 -
los tornillos (A) y las tuercas (F) suministrados, como en la ilustración anterior.
Using the given hardware and hand tighten the braces with screw A + nut F.
Apriete los tornillos a mano.
Assembly instructions
Assembly instructions
1
C
H
G
8
(Joining the two halves assembled in step l) Stand the section 1 upright, and place the upper cross
PASO 2 - Fije los listones de conexión superiores (4 y 5) a las patas del bastidor
STEP 2 -
braces (4&5) close to section 1. Inserting truss head screw C through the hole of section1
inferior conectando la pata (1) al listón de conexión superior con el perno (C) y
and section 4&5 and install K Keps nut and tighten securely.
la tuerca (J) como se muestra en la ilustración de arriba. Apriete los tornillos a
(Installing the lower cross braces and casters) Place the assembled lower cross braces (2&3) under section 1,
mano.
Stand the section 6 upright to make it close to section 1 and secrion 4&5. Inserting screw B through
STEP 3 -
section 4&5 and section 6, install G Keps nut and tighten securely.Next insert the threaded caster stem
through the hole in the end of the lower cross brace then through the riser and finally the riser brace.
Install (H) flat washer and (I) Keps nut, repeat this at the remaining (3) aster locations and securely tighten.
J
60
A
5
3
5
B
4 o 5
F
6
2 o 3

Publicidad

loading