Using the scale
1. Open the battery compartment 1. Insert the
batteries as per the polarity diagram in the
battery compartment 1.
2. Close the battery compartment 1. The battery
compartment lid must audibly engage.
3. Place the scale on a flat and stable surface.
Ensure that neither the floor at the location of the
scale nor the upper surface of the scale are wet,
otherwise there is a risk of slipping!
Notice!
This scale contains sensitive electronic components
and it should therefore NOT be located:
• close to sources of heat
• in environments with extreme air humidity.
Attention
Never burden the scales one-sidedly.
Always step onto the scales in the
middle and with both feet. Otherwise,
the scales could tip and become irre-
parably damaged. Additionally, there
is the risk of falling over!
Attention
Never use the scale if it is wet or moist.
Never step onto the scale with wet or
moist feet. There would be a serious
risk of slipping and personal injury!
Attention
:
NEVER jump onto the glass scale, this could irre-
parably damage it.
4. Stand briefly on the scales so that the device
turns itself on.
:
:
5. Press the language button 4 repeatedly until the
desired language appears on the left of the dis-
play 2.
6. Set the desired volume level using the volume
control 3. To deactivate the voice, turn the
volume control 3 towards the "-" until you hear
a click.
Notice!
The language and the sound volume must only be
adjusted on the first use.
7. Stand with both feet on the scales. Stand as still
as possible and without displacing your weight.
8. During the weighing process (about 5 seconds)
the displayed value increases until your weight
is determined.
9. When your weight is determined, the result blinks
twice on the display 2 and it speaks your deter-
mined weight.
After you have stepped down from the scale it
sounds "Ready for operation" and you can then
start another measurement.
If you simply wait, the scale will indicate by a dou-
ble beep that it has switched itself off.
- 37 -
68.8