universalblue UBE2400-20 Manual De Instrucciones página 50

Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 5 cm space shall be preserved
around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select heat-
resistant work surface material to avoid larger deformation caused by the heat
radiation from the hotplate. As shown below:
L(mm)
590
Under any circumstances, make sure the Induction cooker hob is well ventilated and
the air inlet and outlet are not blocked. Ensure the Induction cooker hob is in good
work state. As shown below:
The safety distance between the hotplate and the cupboard above the hotplate
should be at least 760mm.
Before you install the hob, make sure that:
W(mm) H(mm) D(mm)
520 55 51
A(mm) B(mm)
760 50 mini
A(mm) B(mm)
560 490
C(mm) D
20 mini Air intake
X(mm)
50 mini
E
Air exit 5mm
50