Safety Instructions - Lofra DOLCEVITA Instalación

Safety instructions

- This booklet contains important information about the installation, of your equipment and
is an integral and essential part of the product. Please read this booklet carefully before
proceeding with any operation, in order to protect your safety and not damage the product
itself.
- Store the booklet safely for further consultation, and give it to the new owner if you sell the
equipment, since the information therein is addressed to the purchaser and all the people
that, one way or another, contribute to the installation of the product.
- LOFRA (hereinafter referred to as "the Manufacturer") denies any and all liability due to
the failure to comply with the instructions below, including any damage caused from misuse
and unauthorized changes in the product, as well as the use of non-genuine spare
parts supplied by LOFRA
- The installation and extraordinary maintenance operations must be carried out by
qualified personnel, authorized by the Manufacturer, having the necessary product
knowledge, and in compliance with the regulations in force in the Country of use regarding
the types of systems involved and safety in the workplace.
- Before connecting the device to the mains, please check that all connection data on the product label
(voltage and frequency) match those of the mains (Refer to chapter "
24 for further information on the data plate). Please note that any incompatibility could lead to
serious damage to the device, so always contact a qualified electrician before installing your hood;
- check that the systems comply with the regulations in force in the Country of use;
- always compare the system data with that printed on the data plate;
- check all the components for integrity and functionality: in case of fault, stop the installation
and contact the distributor.
- do no connect the product to the power main before any other step of the installation is
completed;
- Any interventions, tampering or modifications not expressly authorised, not complying with
the content of this manual, will void the warranty, and may also cause immediate danger or
dangerous situations that may result in injury or even death.
- During the installation of the equipment, anyone not responsible for carrying out installation
activities must refrain from transiting or stationing in or nearby the installation area.
- Being potentially hazardous, packaging materials must be kept out of reach of children or
animals, and must be correctly disposed of, in accordance with local regulations.
- During the installation activities, always use the required personal protective equipment (e.g.
safety shoes) and act with the due level of care and attention.
- The fastening kit (screws and plugs) supplied with the hood can only be used on masonry
wall. For installation on other types of walls consider alternative fastening systems, taking into
account the strength of the wall itself and the weight of the hood.
- To perform the installation and ensure the best solidity of the whole framework, always use
the the securing devices and the components (e.g. screws, bolts, brackets, etc.) provided with
the packaging;
- In order to prevent any loss in the product efficiency and safety of use, the hood should be installed
indoor only, sheltered from weathering (i.e., rain, wind) and harsh environmental conditions (dried
salt, extreme thermal excursion);
- Do not change the electrical, mechanical and functional structure of the equipment.
- The electric connection socket must be easy to reach even after installation of the equipment.
Should this not be the case, a general switch must be installed, in order to disconnect the
hood from the power supply in case of need.
How to read product label
21
" on page