Operation Of The Chicken Roast - ICQN MGA1-8 Serie Manual De Instrucciones

GB
Electronic Card Error Codes and Recommended Solutions
Electronic card error codes, their descriptions and recommended solutions
are given in the table below.
Error Codes
Electronics are extremely heated and resistances are
F1
stopped.
F2 Supply voltage error.
F3
Temperature sensor is open circuit or short circuit.
F4 Temperature sensor exceeds 350 °C.
Maximum operating period is exceeded in manual
F5
mode.
F6 Real time clock error.
F7 Meat probe short circuit error.
F8
Self-check, general electronics error.
F9 Connection error.

Operation Of The Chicken Roast *

Figure 73
by rotating it. After closing the door, bring the oven to the grill mode and
adjust the thermostat temperature to the maximum temperature level.
During the cooking process, place a tray on the bottom to collect the
dripping grease. After grilling, place the plastic handle by rotating it and
remove it from the oven. Add some water to the tray for ease of cleaning.
Description
Spit whole chicken to the skewer. To ensure a
healthy grill, center and secure the chicken with
the fixing hooks on each side of the skewer.
Place the skewer on the chicken roast wire
and slide it inside the oven, and make sure
that the end of the skewer is seated on the
chicken roast motor housing.
Before closing the oven door, do not forget
to remove the plastic handle from the skewer
48
What To Do
Wait for the oven to cool down.
Check whether the supply voltage is
normal.
Contact authorized service.
Contact authorized service.
Restart cooking.
Contact authorized service.
Contact authorized service.
Contact authorized service.
Contact authorized service.