Securing Your Child; Harness Mode - Britax GROW WITH YOU CLICKTIGHT Guia Del Usuario

Securing Your Child

Harness Mode

Never route the vehicle belt over the child when using
this child seat in harness mode.
Adjust the belts provided with this child seat so they
fit snugly around your child. A snug strap should not
allow any slack. It lies in a relatively straight line without
sagging. It does not press on the child's flesh or push
the child's body into an unnatural position.
Verify that the child seat is secure and the harness is
properly adjusted around the child each time the child
seat is used.
Before you begin:
Always check the seat area for debris and remove it to prevent
interference with the harness adjuster mechanism or CLICKTIGHT.
1. Loosen the harness.
a. Press the release lever.
b. Pull both harness
straps forward.
2. Open the chest clip.
a. Press tabs.
b. Pull apart.
3. Release the buckle and
place the harness straps
around the armrests.
4. Place the child in the
restraint with child's
back flat against the seat.
GROW WITH YOU CLICKTIGHT / PLUS User Guide
WARNING!
Table of Contents
17